International > ET5000

Bootloader Xtrend ET5000 HD

(1/1)

Threepm:
How to Install ET5000 bootloader

1. Unzip the ET5000 folder in to the root directory of a USB Pen Drive.
2. Power off Receiver with switch on the back.
3. Insert USB Pen Drive into the USB socket .
4. Power on Receiver.
5. Waiht untill two led lights will light.
6. Press the up button.
7. Bootloader will now install from the USB Pen Drive .
8. Receiver will reboot once the install is complete.
Bootloader is now installed.
Remove the USB Stick.

Very Important!!!.
Delete the folder after you've done the update.
If you use the same USB Stick to update your firmware and leave the cfe.bin file in the ET5000 folder by accident it could cause problems next time you try to update an image.

Latest bootloader you can find here.

Навигация

[0] Главная страница сообщений